Me too. Re: Have to unplug CV constantly. Message 2 of Hi, Thanks for the reply! To answer your questions: What channels are you using? I'll have to look, but not sure what that has to do with me having to restart. Wifi: was also flashing. Basically, I had no service. I was not home and the last time, I forgot to even check to see if my network cable to my pc, was working connected.
So I apologize for that. I used to work for Comcast as an installer. I have an excellent Signal to the modem. I have a home run from my modem to the ground block.
I'm wondering if there was anything wrong with the actual modem, or the software. I have quad core cable RG6 ran. Did you see the failure in the event log? Does it mean anything?
Message 3 of Possible this is signal related or ISP service related. Message 4 of This reduces costs, avoids waste, improves the utilization of production facilities and ultimately guarantees better efficiency and cost effectiveness for the company. By the integration of stand-alone editors for alarm logging, tag logging, text library, user administrator, user archive and the acoustic alarm into the Configuration Studio the mass data engineering got again much more efficient.
It is possible to open each single editor separately which makes it very easy to exchange data between these editors. Of course the usual operating functionality of Excel is still valid. When doing project work in a team it is of course possible for multiple project engineers to open the single editors in parallel.
With the help of the integrated OPC-client it is also possible to connect to any 3rd- party system. The administration and implementation of the messages for the destination countries is clearly arranged and therefore efficient to manage. By the utilization of the TextLibrary it is possible to export all or subsets of the texts used in WinCC.
Vice versa it is of course possible to import all these texts after they are translated to any language. The appropriate operator language is independent regardless of the language of the installed operating system. Every operator can individually choose the language of the displayed texts. For example it is possible to display messages simultaneously using different languages when working in international teams.
WinCC allows you to implement display languages in a simple and cost-effective manner. This is independent of the language set in the operating system.
This means that it is possible to display multiple languages parallel to each other, such as message texts in European and Asian languages. This makes commissioning considerably easier in international teams. Resulting from the integration of the cross-reference editor it is on one hand possible to locate very fast the places where a special variable is used for example in case of troubleshooting. On the other hand it is possible to release non used variables to align the license costs optimal to the actual project.
Using the WinCC User Administration you consistently can assign and check the access rights of the users regardless if it is a local access or if the access is web based. For up to user groups with up to single users each the access rights for WinCC functions can be administered. In total it is possible to assign different permissions. Therefore it also covers the extended FDA safety requirements. But it is also possible to login using a chip card where name, domain and password is saved in encrypted form.
The modern graphics system of WinCC supports the work of a project engineer as well by the use of standardized preconfigured picture components as when creating user definable picture components and faceplates. The use of these components enables the project developer to create his own at any time reusable company specific project standards which results in a much shorter Time-to- Market for the project.
Global settings which can be done in the graphics system enable the project engineers to implement once defined company standards in a WinCC project and to apply these timesaving to all picture objects which have the same attributes. It is also possible to export these settings and to import them again to any other WinCC project. On one hand this possibility supports the in-house standardizing in an efficient way and on the other hand it provides the opportunity that several project engineers can work on huge applications simultaneously in accordance with the company standards.
When creating images it is of course possible to do Direct2D soft shadows and to integrate SVG — files. Instead of using discrete colors the color palette is working with color indexes. This enables the user to realize customer-specific designs in a very simple way.
If for example a customer wants to change the color from red to orange he only has to assign the color orange to the index for the color red.
While changing this, the color of all red objects having the same index changes to orange Applying modular design makes it simple to create and to centrally manage custom specific faceplates. Changes are automatically applied to all points where the faceplate is utilized. For example efficient operation is possible by the use of application specific menus and toolbars. It is possible as usual in Windows to either fix them or to leave them movable.
This makes configuring even more efficient. Libraries and wizards accelerate make the setup of projects easier. Therefore they reduce the error rate dramatically. Historical process information is saved as WinCC process value archives in the integrated, high-performance SQL database. The memory requirement is optimized through efficient algorithms and intelligent, loss-free compression functions such as the Swinging Door algorithm.
To reduce the amount of data for long-term archiving, the data can be compressed even further. To do so, the maximum value, minimum value or weighted mean, the sum or the difference is calculated for adjustable periods of time e. In addition to automatic archiving, it is possible to add values manually to the archive or to modify archive values later with the appropriate authorization. This is required, for example, for laboratory values in some industries. For reasons of traceability, these values are marked as "modified manually" and the process is documented with an operation message.
Efficient controls are integrated into WinCC process pictures for the display of current or historical data. Process values can be displayed as a table or analyzed using a trend display. The display is either predefined or can be adjusted individually by the operator, if authorized. Numerous means of representation guarantee the best possible overview. When you switch from autonomous mode to controller mode, and switch back to autonomous mode, the Cisco IOS XE configuration is not restored because the startup configuration is empty.
You have to manually restore configuration from the backup. CDB contents are erased for subsequent mode switches and Cisco IOS configuration are not restored as startup configuration is empty. If the device is in controller mode, the show sdwan running-config command does not display the following information:. Configurations under line VTY except for transport, access-class, and ipv6 access-class. To verify these configuration use the show running-config command.
Before beginning this procedure, ensure that you have access to the Cisco CSRV or Cisco Catalyst V router through the currently configured console access method. The image used for deploying the Cisco CSRV or Cisco Catalyst V software determines the default type of console access to use, which can be virtual or serial.
The procedure includes changing the mode from controller to autonomous, and then back to controller, which is required for operation with Cisco SD-WAN. These mode changes cause the device to reload. Disable controller mode.
Enter the following command and follow the prompts to complete the command. After the device restarts, enter enable to enter privileged EXEC mode. This option specifies that the device console is detected automatically. This is the default setting during the initial installation boot process. Change the device back to controller mode. In this upgrade procedure, Cisco vManage saves the device configuration before the upgrade.
If the configuration on the device, that is modified using CLI is not same as on Cisco vManage, then the device has inconsistent configuration after the upgrade. For example, if you configure the BGP AS number of a device to a different value using CLI, the device can have inconsistent configuration and the upgrade fails.
Therefore, we recommend that you upgrade the device using Cisco vManage. An interface that is configured with a higher preference value has a higher priority. We recommend using Cisco vManage to upgrade. This keeps devices and the controller synchronized. If it is necessary to upgrade using the CLI, use the following steps. Use these following steps to make configuration file copies before performing the manual upgrade process.
Without these steps, the router will lose its configuration during the upgrade. If the deployment is on a public cloud service, such as Amazon Web Services AWS , failure to save the configuration before upgrading manually can cause an unrecoverable loss of connectivity with the device.
In contrast to a hardware device, there may be no way to gain any type of console access to the virtual router.
Verify the upgrade using request platform software sdwan software upgrade-confirm. From In controller mode, use the config-transaction command to enter global configuration mode. The configuration terminal command is not supported in Controller mode. Device boots up in autonomous mode and configuration is preserved via startup configuration.
Activate the image. This resets the device, deleting any existing configuration. The device starts in day zero configuration. If necessary, remove an existing software image to provide space for loading a new software image.
Activate the new image. Device boots up with ucmk9 image and configuration is restored if the uckm9 image was previously installed on the device. Downgrading to a fresh install of old image versions brings the device to Day 0 configuration. To proceed, use the clean option at activation. To downgrade from controller mode to earlier IOS XE images, switch to autonomous mode and follow the downgrade process.
The smart licensing authorization is lost when a device switches from autonomous to controller mode and back to autonomous mode again. Register the device using license smart register idtoken token force command in privileged EXEC mode. Set the required crypto throughput using platform hardware throughput crypto crypto-value. Save the configuration using write memory in privileged EXEC mode. Reload the device and verify that the new crypto throughput value is applied using the show platform hardware throughput crypto command.
Enable the reservation mode using the license smart reservation command in global configuration mode. Save the configuration using write memory. The Task View page opens, showing the progress as Cisco vManage creates logical devices. The Chassis Number column shows the unique identifier for each logical device. For the logical devices that you have created, click … and choose Generate Bootstrap Configuration.
The Generate Bootstrap Configuration dialog box shows the content of the bootstrap configuration, which includes the UUID of the logical device, and includes the configuration details provided by the device template if you have attached one. Do you beleive this to be the case? Yes it is super easy on Windows, change the file extension to. I have only one question, how can i converted the CVC in.
That would depend on the tool being used. Skip to main content. Create new account Request new password. CM Firmware upgrade.
0コメント